Prep Time: 30 minutes minutes
Total Time: 30 minutes minutes
Method: Melt and Pour
Cosmetic: Soap Bar
Servings: 10 soap bars (100g)
Author: Sofia Matias
Cost: $7 - 12$ / 7€ - 12€
Preparations
You can make crystal clear soap base at home. Prepare it 2 weeks in advance.
Gather all ingredients and equipment. A heat source will be required: microwave or a stove. I personally use a small eletrical stove.
Cut the soap bars into very small cubes (0,5 cm x 0,5 cm x 0,5 cm)
Cut the melt and pour soap base into small cubes (2 cm x 2 cm x 2 cm). Pour them into your bowl or pan.
1 kg crystal clear soap base
Making Soap
Take it to an electric stove or the microwave and use medium-low heat (around 60 °C). Let the soap base melt completely. Spray with alcohol if bubbles or a solid pelicule form at the surface. Turn off the heat. Add the red colorant and mix well.
20 ml rose fragrance oil
Add the fragrance oil when the soap is at a lower temperature without hardening (around 50 °C ), and mix well. Keep the soap around 50 °C from now on. 1 tsp red iron oxide (CI 77491)
Pour a small layer of soap into the large soap mold.
Add the small soap cubes you cut at the beggining
Pour the rest of the soap into the soap mold.
Unmolding and Cutting the Soap
Let the soap set for 24 hours until it hardens completely. If needed, put the soap mold inside the fridge.
Unmold your soap bulk bar and cut it into small soap bars.
Melt and pour soap should be wrapped in plastic wrapping film right after hardening, to avoid soap "sweating". You may also keep them inside an airtight closed box.
Enjoy your lovely red soaps!!